QUICKLY FIND ALLTHE PARTS YOU NEED ON OUR WEBSITE partseurope partseurope.official partseurope.official EVOLUTION BIG TWIN • SHOVELHEAD • PANHEAD KNUCKLEHEAD • FLATHEAD • IRONHEAD XL OldBook 2026-2027 TM
Builder/Owner: Jason Mook Deadwood Custom Cycles Paint: Eric Malotke Open Throttle Customs Pictured: Jason Mook and the team from Deadwood Custom Cycles A classic model Harley Davidson FXR found in a small South Dakota town was the starting point for the 2026-27 Drag Specialties OldBook cover bike. But the builder of this stunning FXR custom, Jason Mook, owner of Deadwood Custom Cycles in Deadwood, South Dakota, did not start this project with the intention of building a cover bike. He bought the bike for himself. “I love FXRs,” Mook said.“I think they are the greatest bike model that Harley Davidson has built. Just my opinion, you can argue it with me, but that’s what I think.” “I have eight of them, each one a bit different” Mook said with a laugh.“I’m always on the lookout for FXRs.” Mook found the bike for sale in the town of Nemo, South Dakota.“One of the shop guys was in contact with the seller about buying a car, and he mentioned that the seller also had an FXR,” Mook said.“It was available at a great price, so I went down to look at it, did a short test ride.” It was rough but running, so he purchased it and took it back to the shop. “I put it up on the bench,” Mook said. It had performed OK during his brief test ride, but once he started to tear it down, he found some things that needed to be repaired or replaced to make the bike a solid runner.“A few things I found, I kind of was surprised my little test ride had gone OK,” he laughed. The entire bike was stripped down, and the frame and engine cases were sent out for powder coating.Then Mook turned to the Drag Specialties OldBook to start sourcing parts for the rebuild – not because this build was going to be the next OldBook cover bike.The OldBook is his usual go-to resource for parts for these kinds of builds. “This started out as a build just for me,” Mook said.“And there are so many great parts in the OldBook for FXRs. Drag has been offering parts for FXRs almost since the day the model came out in 1982.And I like to keep things ‘pure,’ in a sense,” he said.“I don’t put M-Eight motors in FXR frames, for example.We CAN do stuff like that, but I like to keep the FXR in its purest form. I still love carburetors!” The engine/transmission setup got ‘all the goodies’, Mook said. Parts from S&S Cycle and Feuling were ordered to ensure strong, reliable engine performance. Mook went with an Andrews kit for a rebuild of the 5-speed transmission. “The FXR late 1989 to 1990 is the first 5-speed transmissions that had a splined main shaft.They are not without a few known issues,” Mook said.“I wanted to make sure it was set up right.” As the parts started arriving, the bike was up on the bench partially assembled, when a visit from Drag Specialties’ Tom Motzko sparked the idea of using the in-progress build as the catalog cover bike. ON THE COVER
dragspecialties.eu | #SINCE1968 partseurope.eu “Tom is an occasional visitor to the shop,” Mook said.“He came in, and there was some discussion about what we had available that might work for a cover bike build. I had a couple potentials, but the whole time we were talking, the FXR project was sitting up there on the lift. It kept catching our attention, like it was saying ‘Pick me! Pick me!’And that’s what we did!” The final parts list expanded to include Saddlemen FXR mini fairing, a RWD rear fender and Klock Werks front fender.“Those pieces gave the painter a great blank canvas to work with,” Mook said. “I already had the frame, cases and some other parts powdercoated black, and also had some silver in the bike already,” Mook said.“But I started to think about the final look for a cover bike, it needs to have that classic Drag Specialties blue in it. I’m not a ‘blue bike’ kind of guy, but for this build, I really wanted to have blue be a featured color.” Mook gave his ideas for the final look to the painter, Eric Malotke at Open Throttle Customs, with the suggestion to “Just go for it! I asked for multiple shades of blue, to go super-blue, in a sense,” he said. “And he got it just perfect.” The blue paint is accented with a lot of Arlen Ness anodized blue accessories.“Those guys are just the kings of custom,” Mook said.“They keep coming out with these amazing parts and finishes. I went with their footpegs, grips, mirrors, levers, the fork brace, all anodized in blue.” The bike’s seat is a Drag Specialties Predator III with double-diamond stitching with blue thread. The exhaust system is from Trask, in Mook’s preferred finish of choice - stainless steel.“I love the look of stainless steel for the exhaust,” he said.“It is low maintenance, and it looks racy.” “I really want to emphasize what an honor it is to have a bike on the cover,” Mook said.“And this build is a true team effort – every single member of the team at some point had their hands on this bike.And this build really is a true catalog build. I think there are only three parts in the entire build that are not from the OldBook – this bike is a great representation of what you can do with one of the most iconic Harley Davidson models and the parts in the OldBook and FatBook.”
4 14. Tanks & Oil Filters.. . . . . . . . . . . . . . . . . 747-779 15. Dashes & Gauges.. . . . . . . . . . . . . . . . . 780-803 16. Frames & Suspension.. . . . . . . . . . . . . . 804-848 17.Fenders......................... 849-863 18. Footrests & Floorboards. . . . . . . . . . . . . 864-911 19. Wheels & Axles.. . . . . . . . . . . . . . . . . . 912-921 20. Covers, Locks & General.. . . . . . . . . . . . 922-951 21. Audio, Communications & Mounts. . . . . . 952-982 OEM Cross Reference.. . . . . . . . . . . . . . . . 983-1001 VINGuide........................ 1002-1005 Drag Specialties Quick Reference Chart.. . 1006-1007 Conversion Chart & European Certifications. . . . . . . . . . . . . . 1008-1010 1. Windshields & Fairings.. . . . . . . . . . . . . . . . 6-40 2. Saddlebags & Luggage.. . . . . . . . . . . . . . . 41-97 3. Seats & Sissy Bars.. . . . . . . . . . . . . . . . . 98-179 4.Exhaust......................... 180-223 5. Fuel/Air Systems. . . . . . . . . . . . . . . . . . 224-254 6.Engine......................... 255-321 7. Transmission, Clutch Line & Driveline.. . . 322-390 8. Gaskets & Seals.. . . . . . . . . . . . . . . . . . 391-412 9.Electrical........................ 413-486 10. Lighting & License Plates. . . . . . . . . . . . 487-572 11. Handlebars, Controls & Mirrors. . . . . . . . 573-672 12.Cables......................... 673-700 13. Brakes & Brake Lines. . . . . . . . . . . . . . . 701-746 OldBook 2026-2027 TM Please Note: All Evolution Sportsters are in the 2026 FatBook™. All Evolution Big Twins are in THIS catalog.
5 IMPORTANT INFORMATION RELATING TO MANUFACTURER’S WARRANTY, EMISSION CONTROL REGULATION AND NOISE REGULATION INFORMATION: DISCLAIMER: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is caused by tuning characteristics, i.e. timing, carburetor, fuel injection/controller settings, etc., and is not caused by defective manufacturing. See the Tires, Tools and Chemicals catalog for products that will help prevent and remove blueing. DISCLAIMER: Products shown may be designed, manufactured, intended and sold for closed circuit race use only and use of the same on public roads or lands may be a violation of local, state and/or federal/EU laws. DISCLAIMER: A number of regions have exhaust noise laws. Exhaust products advertised might not be legal for sale or use on public roads or lands in such jurisdictions. Check applicable laws and regulations. DISCLAIMER: Check your applicable laws and manufacturer’s publication(s) and/or website(s) for manufacturer’s warranty, maintenance, safety, mounting and any regulatory compliance/non-compliance information.
6 7 Windshields 27 Fairings 37 Trims, Accents, Deflectors 39 Fairing Brackets/Windshield Fasteners 40 Fairing Bags, Pouches & NavBags WINDSHIELDS & FAIRINGS
dragspecialties.eu / partseurope.eu SECTION 1 All part numbers in BLUE are new for the OldBook. WINDSHIELDS & FAIRINGS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS EXHAUST ENGINE FUEL/AIR SYSTEMS GASKETS & SEALS TRANSMISSION, CLUTCH LINE & DRIVELINE ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS LIGHTING & LICENSE PLATES CABLES BRAKES & BRAKE LINES DASHES & GAUGES TANKS & OIL FILTERS FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS AUDIO, COMMUNICATION & MOUNTS FENDERS WHEELS & AXLES COVERS, LOCKS & GENERAL 7 See FATBOOK For Late Model Applications MEMPHIS SLIM •Slimmed-down version of Memphis Fats is 45,5 cm (18”) wide •Available in clear, solar (a light tint with 72% visible light transmission), “Night Shades” clear, “Night Shades” black smoke (a black tint with 40% visible light transmission) and “Night Shades” dark black smoke (a black tint with 25% visible light transmission) •Available in 38 cm and 43 cm (15” and 17”) heights •Fits standard headlight size 14,5 cm - 18 cm (5 3/4” - 7”) PART # DESCRIPTION FOR 14,6 CM - 17,8 CM (5 3/4” - 7”) HEADLIGHT CUTOUTS 38 CM (15”) TALL MEM4110 Clear MEM4119 Solar 43 CM (17”) TALL MEM4210 Clear MEM4219 Solar FOR 17,8 CM (7”) HEADLIGHT CUTOUTS 38 CM (15”) TALL 2311-0112 “Night Shades” clear 2311-0114 “Night Shades” black smoke 2311-0113 “Night Shades” dark black smoke 43 CM (17”) TALL 2311-0115 “Night Shades” clear 2311-0116 “Night Shades” black smoke PART # DESCRIPTION FOR 22,9 CM (9”) HEADLIGHT CUTOUTS 38 CM (15”) TALL MEM4120 Clear MEM4129 Solar 2313-0317 “Night Shades” clear 2313-0319 “Night Shades” black smoke 2313-0318 “Night Shades” dark black smoke 43 CM (17”) TALL MEM4220 Clear MEM4229 Dark black smoke 2313-0320 “Night Shades” clear 2313-0321 “Night Shades” black smoke •Made of Lucite® for excellent optics and durability •Windshield straps are polished stainless steel with CNC-machined billet aluminum fittings and stainless steel socket-head screws •Mounting kit must be purchased separately; see pages 12-13 •Optional Lowers available for additional windshield coverage; see page 10 MEM4110 MEM4219 2311-0113 2311-0115 2313-0318 MEM4229
dragspecialties.eu / partseurope.eu All part numbers in BLUE are new for the OldBook. SECTION 1 WINDSHIELDS & FAIRINGS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS EXHAUST ENGINE FUEL/AIR SYSTEMS GASKETS & SEALS TRANSMISSION, CLUTCH LINE & DRIVELINE ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS LIGHTING & LICENSE PLATES CABLES BRAKES & BRAKE LINES DASHES & GAUGES TANKS & OIL FILTERS FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS AUDIO, COMMUNICATION & MOUNTS FENDERS WHEELS & AXLES COVERS, LOCKS & GENERAL 8 See FATBOOK For Late Model Applications MEMPHIS FATS •Features traditional American styling available in clear, solar (a light tint with 72% visible light transmission), “Night Shades” clear, “Night Shades” black smoke (a black tint with 40% visible light transmission) and “Night Shades” dark black smoke (a black tint with 25% visible light transmission) •Made from Lucite® for excellent optics and durability •56 cm W (22”) with five standard heights to choose from •Windshield straps are polished stainless steel with CNC-machined billet aluminum fittings and stainless steel socket-head screws •For standard headlight size 14,5 cm – 18 cm (5 3/4” – 7”) •No-Tool detachable Trigger-Lock mounting kits must be purchased separately; see pages 12-13 •Optional Lowers available for additional coverage; see page 10 PART # DESCRIPTION 33 CM (13”) TALL MEM31101 Clear 38 CM (15”) TALL 2313-00641 Clear 2313-00721 Solar 43 CM (17”) TALL MEM32101 Clear MEM32191 Solar 48,5 CM (19”) TALL MEM33101 Clear MEM33191 Solar 53,5 CM (21”) TALL MEM3410 Clear MEM3419 Solar FOR 17,8 CM (7”) HEADLIGHT CUTOUTS 33 CM (13”) TALL 2311-0100 “Night Shades” clear 2311-0102 “Night Shades” black smoke 2311-0101 “Night Shades” dark black smoke 38 CM (15”) TALL 2311-0103 “Night Shades” clear 2311-0105 “Night Shades” black smoke PART # DESCRIPTION FOR 17,8 CM (7”) HEADLIGHT CUTOUTS (CONT) 38 CM (15”) TALL (CONT) 2311-0104 “Night Shades” dark black smoke 43 CM (17”) TALL 2311-0106 “Night Shades” clear 2311-0107 “Night Shades” black smoke 48,5 CM (19”) TALL 2311-0108 “Night Shades” clear 2311-0109 “Night Shades” black smoke 53,5 CM (21”) TALL 2311-0110 “Night Shades” clear 2311-0111 “Night Shades” black smoke FOR 22,9 CM (9”) HEADLIGHT CUTOUTS 33 CM (13”) TALL 2313-00031 Clear 2313-0305 “Night Shades” clear 2313-0306 “Night Shades” dark black smoke 2313-0307 “Night Shades” black smoke 38 CM (15”) TALL 2313-00731 Clear 2313-00811 Solar 2313-0308 “Night Shades” clear PART # DESCRIPTION FOR 22,9 CM (9”) HEADLIGHT CUTOUTS (CONT) 38 CM (15”) TALL (CONT) 2313-0310 “Night Shades” black smoke 2313-0309 “Night Shades” dark black smoke 43 CM (17”) TALL MEM3620 Clear MEM36291 Solar 2313-0311 “Night Shades” clear 2313-0312 “Night Shades” black smoke 48,5 CM (19”) TALL MEM37101 Clear MEM3719 Solar 2313-0313 “Night Shades” clear 2313-0314 “Night Shades” black smoke 53,5 CM (21”) TALL MEM3810 Clear MEM3819 Solar 2313-0315 “Night Shades” clear 2313-0316 “Night Shades” black smoke 1 ABE approved. MEMPHIS FATS WITH BIG HEADLIGHT CUTOUT •Features a 24 cm (9,5”) cutout with a custom shape that is designed for a perfect fit on the large nacelle headlights made by Arlen Ness, Rick Doss and others •Popular American styling available in a clear option •56 cm (22”) W with three standard heights •Windshield straps are polished stainless steel with CNC-machined billet aluminum fittings and stainless steel socket-head screws •No-Tool detachable Trigger-Lock mounting hardware must be ordered separately; available in polished or “Night Shades” black, see pages 12-13 •Optional Lowers available for additional windshield coverage, see page 10 PART # DESCRIPTION 43 CM (17”) TALL 2313-0054 Clear See chart for details MEM3319 2311-0104 MEM3110 2313-0310 2311-0108
dragspecialties.eu / partseurope.eu SECTION 1 All part numbers in BLUE are new for the OldBook. WINDSHIELDS & FAIRINGS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS EXHAUST ENGINE FUEL/AIR SYSTEMS GASKETS & SEALS TRANSMISSION, CLUTCH LINE & DRIVELINE ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS LIGHTING & LICENSE PLATES CABLES BRAKES & BRAKE LINES DASHES & GAUGES TANKS & OIL FILTERS FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS AUDIO, COMMUNICATION & MOUNTS FENDERS WHEELS & AXLES COVERS, LOCKS & GENERAL 9 See FATBOOK For Late Model Applications MEMPHIS FATS/SLIM FOR ROAD KING •Features traditional American styling available in clear, and solar (a light tint with 72% visible light transmission) •Made from Lucite® for excellent optics and durability •Memphis Slim and Fats have a 23 cm (9”) cutout and fit 94-98 FLHR/FLHRI/ FLHRCI Road King applications only; see MOUNTING KIT chart for details •Memphis Slim are 45,5 cm (18”) W and available in 38 cm or 43 cm (15” or 17”) heights •Memphis Fats are 56 cm (22”) W with five standard heights to choose from •Windshield straps are available in polished stainless steel with CNC-machined billet aluminum fittings and stainless steel socket-head screws or the “Night Shades” black version which is a gradient black windshield with black E-coated stainless steel straps, fittings and hardware for a black-on-black sinister look •No-Tool detachable Trigger-Lock mounting kit must be ordered separately; available in polished or “Night Shades” black, see chart below MEMPHIS FATS 56 CM (22”) WIDE; 23 CM (9”) HEADLIGHT CUTOUT) PART # DESCRIPTION 33 CM (13”) 2313-00031 Clear 38 CM (15”) 2313-00731 Clear 2313-00811 Solar PART # DESCRIPTION 43 CM (17”) MEM36201 Clear MEM36291 Solar 48,5 CM (19”) MEM37101 Clear MEM37191 Solar PART # DESCRIPTION 53,5 CM (21”) MEM3810 Clear MEM3819 Solar 1 ABE approved. MEMPHIS SLIM (45,5 CM (18”) WIDE; 23 CM (9”) HEADLIGHT CUTOUT) PART # DESCRIPTION 38 CM (15”) MEM41201 Clear PART # DESCRIPTION 38 CM (15”) (CONT) MEM41291 Solar PART # DESCRIPTION 43 CM (17”) MEM42201 Clear PART # DESCRIPTION 43 CM (17”) (CONT) MEM42291 Solar 1 ABE/TÜV approved. MOUNTING KITS PART # DESCRIPTION FOR 94-98 FLHR/FLHRI/FLHRCI 2320-00481 Polished PART # DESCRIPTION FOR 94-98 FLHR/FLHRI/FLHRCI (CONT) 2320-00491 “Night Shades” black 1 ABE approved. See chart for details Once installed, Trigger-lock mounts let you remove or change Memphis Shades Fats or Slims windshields in a moment’s time MEM3620 MEM3629 MEM4120 MEM4129
dragspecialties.eu / partseurope.eu All part numbers in BLUE are new for the OldBook. SECTION 1 WINDSHIELDS & FAIRINGS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS EXHAUST ENGINE FUEL/AIR SYSTEMS GASKETS & SEALS TRANSMISSION, CLUTCH LINE & DRIVELINE ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS LIGHTING & LICENSE PLATES CABLES BRAKES & BRAKE LINES DASHES & GAUGES TANKS & OIL FILTERS FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS AUDIO, COMMUNICATION & MOUNTS FENDERS WHEELS & AXLES COVERS, LOCKS & GENERAL 10 See FATBOOK For Late Model Applications SIDE WINGS •Expand comfort pocket, channeling air outward while “cleaning” the flow •Adjust to suit rider preference •Can be installed/removed with windshield intact – Santoprene pads grip the windshield but do not mar the surface •”Ghost” shade – a neutral tint with 85% light transmission barely noticeable, with just enough tint to make the edges disappear •Fit Road King, Fat Boy, Heritage and Memphis Fats windshield using injection-molded glass-filled nylon clamps in place of the billet aluminum clamps (can be mounted along with Hot Wing) HOT WING •Boost airstream upward – Venturi action speeds up the airstream while smoothing the flow – without buffeting •Allows the use of a shorter shield; now you can easily look over your shield •Made with “Ghost” shade – a neutral tint with 85% light transmission; barely noticeable, with just enough tint to make the edges disappear •Uses lightweight, economical injection-molded glass-filled nylon clamps •Fits Memphis Fats windshields or similar windshields that measure 3 mm or 4,5 mm thick (includes inserts for both sizes) CUSTOM LOWERS •Provide additional protection by extending your coverage downward •Shield rider from rain, wind and noise coming up from the road •Made of the same high-quality materials as Memphis Shades windshields with matching tints •Available in black, clear and solar (a light tint with 72% visible light transmission) •Must purchase Lowers mounting kits; see pages 12-13 •May require turn signal relocation •Measure 20,5 cm H x 14 cm W (8” H x 5 – 5 1/2” W) •Sold in pairs PART # DESCRIPTION 2350-0200 Side Wings PART # DESCRIPTION 2350-0199 Memphis Hot Wing PART # DESCRIPTION MEP5810 Clear PART # DESCRIPTION MEP5811 Black Clear Black
dragspecialties.eu / partseurope.eu SECTION 1 All part numbers in BLUE are new for the OldBook. WINDSHIELDS & FAIRINGS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS EXHAUST ENGINE FUEL/AIR SYSTEMS GASKETS & SEALS TRANSMISSION, CLUTCH LINE & DRIVELINE ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS LIGHTING & LICENSE PLATES CABLES BRAKES & BRAKE LINES DASHES & GAUGES TANKS & OIL FILTERS FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS AUDIO, COMMUNICATION & MOUNTS FENDERS WHEELS & AXLES COVERS, LOCKS & GENERAL 11 See FATBOOK For Late Model Applications EL PASO •Smooth design complements the lines of your machine •Tapered windshield lower is ideal for handlebar-mounted turn signals •Made of Lucite® for excellent optics and durability •Available in solar (a light tint with 72% visible light transmission) •Measures approximately 51 cm (20” W); available in 33 cm (13”), 38 cm (15”), 43 cm (17”) or 48,5 cm (19”) H above headlight •Fits most round headlights •Optional Lowers available for additional windshield coverage; see page 10 •Features No-Tool detachable Trigger-Lock hardware so you can swap or remove your windshield in a flash •Must order mounting kit separately; see pages 12-13 DEL REY •Small, sleek design that offers good protection in a minimalist package •Made of Lucite® for excellent optics and durability •Available in solar (a light tint with 72% visible light transmission) •Measures approximately 38 cm W x 33 cm H (15” W x 13” H) above headlight •Fits most round headlights •Optional Lowers available for additional windshield coverage; see page 10 •No-Tool detachable Trigger-Lock mounting hardware must be ordered separately; available in polished or “Night Shades” black; see pages 12-13 DEL RIO •Good torso protection in a sleek windshield design •Made of Lucite® for excellent optics and durability •Available in solar (a light tint with 72% visible light transmission) •Measures approximately 48,5 cm W x 38 cm H (19” W x 15” H) above headlight •Fits most round headlights •Optional Lowers available for additional windshield coverage; see page 10 •Features No-Tool detachable Trigger-Lock hardware so you can swap or remove your windshield in a flash •Must order mounting kit separately; see page 12-13 SPEED DEMON •Offers more protection with a sporty look •Features a similar shape and style to the popular handlebar mount “Demon” shield, but with the benefits of easier installation and faster removal due to the exclusive Sportshield mounting system •Measures 53,5 cm (21”) W and 45,5 cm (18”) H above the headlight; fits a 18 cm or 23 cm (7” or 9”) headlight cutout •Made of Lucite® for excellent optics and durability •No-Tool detachable Trigger-Lock mounting hardware must be ordered separately; available in polished or “Night Shades” black; see pages 12-13 PART # DESCRIPTION 33 CM (13”) TALL 2320-0121 Solar 38 CM (15”) TALL 2320-0123 Solar PART # DESCRIPTION 48,5 CM (19”) TALL MEP5229 Solar PART # DESCRIPTION MEP5019 Solar PART # DESCRIPTION MEP5119 Solar PART # DESCRIPTION 2313-0089 Solar 2320-0121
dragspecialties.eu / partseurope.eu All part numbers in BLUE are new for the OldBook. SECTION 1 WINDSHIELDS & FAIRINGS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS EXHAUST ENGINE FUEL/AIR SYSTEMS GASKETS & SEALS TRANSMISSION, CLUTCH LINE & DRIVELINE ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS LIGHTING & LICENSE PLATES CABLES BRAKES & BRAKE LINES DASHES & GAUGES TANKS & OIL FILTERS FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS AUDIO, COMMUNICATION & MOUNTS FENDERS WHEELS & AXLES COVERS, LOCKS & GENERAL 12 See FATBOOK For Late Model Applications NO-TOOL TRIGGER-LOCK MOUNT KITS FOR MEMPHIS SHADES FATS/SLIM AND SPORTSHIELDS •Gone are the days of fumbling with tools to remove your windshield •The revolutionary No-Tool Trigger-Lock hardware features an innovative system that allows you to quickly and easily remove your windshields without the use of any tools •A pair of latches lock the windshield down until the spring loaded “trigger locks” are intentionally disengaged, allowing the rider to remove the windshield •Hardware is fully adjustable to achieve just the right windshield angle •Kits are a combination of CNC-machined aluminum plates, stainless steel bolts and aluminum anchors •Kits are custom-fit to each style of bike for a truly no-hassle installation PLATES-ONLY KITS •Allow changing from Fats/Slim to Sportshield or from Sportshield to Fats/Slim without purchasing the entire mounting hardware INDEPENDENT LOWERS KITS •Mounts Memphis Shades Lowers to most motorcycles •Each kit contains two fork clamp/mounting assemblies and all necessary hardware to mount Lowers plastic •Kits can be used with select Memphis Shades windshields and several OEM windshields •Sold in pairs; must order Lowers plastic separately Whether your bike has conventional forks (tins) or a Springer front end, once installed, Trigger-Lock mounts let you remove or change Memphis Shades Fats/Slims/Sportshield windshields in a moment’s time. MEM9884 2320-0013
dragspecialties.eu / partseurope.eu SECTION 1 All part numbers in BLUE are new for the OldBook. WINDSHIELDS & FAIRINGS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS EXHAUST ENGINE FUEL/AIR SYSTEMS GASKETS & SEALS TRANSMISSION, CLUTCH LINE & DRIVELINE ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS LIGHTING & LICENSE PLATES CABLES BRAKES & BRAKE LINES DASHES & GAUGES TANKS & OIL FILTERS FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS AUDIO, COMMUNICATION & MOUNTS FENDERS WHEELS & AXLES COVERS, LOCKS & GENERAL 13 See FATBOOK For Late Model Applications SPORTSHIELDS DESCRIPTION SPORTSHIELDS TRIGGER-LOCK MOUNT KITS POLISHED BLACK SPORTSHIELD LOWERS HARDWARE For 86-99 FLSTC (w/ OEM light bar) 2320-00223 2320-00723 MEM9891 For 86-99 FLSTC (w/o OEM light bar) 2320-00203 2320-00713 MEM9891 For 90-99 FLSTF (w/ OEM light bar) 2320-00223 2320-00723 MEM9891 For 90-99 FLSTF/FLSTFB/FLS (w/o OEM light bar) 2320-00203 2320-00713 MEM9891 For 93-96 FLSTN (w/ OEM light bar) 2320-00223 2320-00723 MEM9891 For 93-96 FLSTN (w/o OEM light bar) 2320-00203 2320-00713 MEM9891 For 88-99 FLSTSC/FXSTS (w/ light bar)1, 2 - 2320-00733 2320-0001 For 88-99 FLSTSC/FXSTS (w/o light bar)1 - 2320-00733 2320-0001 For 91-98 FXD/FXDL 2320-00123 2320-00693 MEM9884 For 93-98 FXDWG 2320-00143 - - For 80-86 FXWG and wide (11 1/2” to 12” wide) forks 2320-00143 - - For 82-94, 99-00 FXR 2320-00123 2320-00693 MEM9884 For 73-85 FX/FXE/FXS 2320-00123 2320-00693 MEM9884 For 73-85 XL 2320-00123 2320-00693 MEM9884 For other narrow forks 8 1/2” to 9” (with 35 mm - 42 mm forks) 2320-00123 2320-00693 - For other wide forks 11 1/2” to 12” (with 35 mm - 42 mm forks) 2320-00143 -3 - 1 88-92 Springer models require headlight relocation kit PART #DS-280339. 2 Light bar must be a curve style to allow installation of the upper bolt and spool assembly. 3 ABE approved. MEMPHIS FATS AND SLIM DESCRIPTION FATS/SLIM TRIGGER-LOCK MOUNT KITS POLISHED BLACK FATS/SLIM LOWERS HARDWARE For 86-99 FLSTC (w/ OEM light bar) 2320-00213 2320-00443 MEM9891 For 86-99 FLSTC (w/o OEM light bar) 2320-00893 2320-00913 MEM9891 For 90-99 FLSTF/FLSTFB/FLS (w/ OEM light bar) 2320-00213 2320-00443 MEM9891 For 90-99 FLSTF/FLSTFB/FLS (w/o OEM light bar) 2320-00893 2320-00913 MEM9891 For 93-96 (w/ OEM light bar) 2320-00213 2320-00443 MEM9891 For 93-96 (w/o OEM light bar) 2320-00893 2320-00913 MEM9891 For 88-99 FLSTSC/FXSTS (w/o light bar)1 2320-00273 2320-00813 2320-0001 For 88-99 FLSTSC/FXSTS (w/ light bar)1, 2 2320-00273 2320-00813 2320-0001 For 80-86 FXWG, 84-99 FXST 2320-00133 2320-00783 - For 91-98 FXD/FXDL 2320-00113 2320-00773 MEM9884 For 93-98 FXDWG 2320-00133 2320-00783 - For 80-86 FXWG and wide (11 1/2” to 12” wide) forks 2320-00133 2320-00783 - For 82-94, 99-00 FXR 2320-00113 2320-00773 MEM9884 For 73-85 FX/FXE/FXS 2320-00113 2320-00773 MEM9884 For 73-85 XL 2320-00113 2320-00773 MEM9884 1 88-92 Springer models require headlight relocation kit PART #DS-280339. 2 Light bar must be a curve style to allow installation of the upper bolt and spool assembly. 3 ABE approved. CUSTOM MOUNTING FORK AND HANDLEBAR CLAMP ASSEMBLIES •Sold in pairs DESCRIPTION PART # 1 1/4” handlebar clamp assemblies w/ 3/8” rod holders MEM9950 NO-TOOL TRIGGER-LOCK MOUNT KITS FOR MEMPHIS SHADES FATS/SLIM AND SPORTSHIELDS (CONT) 2320-0071 2320-0091
dragspecialties.eu / partseurope.eu All part numbers in BLUE are new for the OldBook. SECTION 1 WINDSHIELDS & FAIRINGS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS EXHAUST ENGINE FUEL/AIR SYSTEMS GASKETS & SEALS TRANSMISSION, CLUTCH LINE & DRIVELINE ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS LIGHTING & LICENSE PLATES CABLES BRAKES & BRAKE LINES DASHES & GAUGES TANKS & OIL FILTERS FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS AUDIO, COMMUNICATION & MOUNTS FENDERS WHEELS & AXLES COVERS, LOCKS & GENERAL 14 See FATBOOK For Late Model Applications HELL CAT •Sculpted full-body shape •Measures 51 cm W (20”) x approximately 45,5 cm H (18”) above headlight •Fits most round headlights •Made of Lucite® for excellent optics and durability •Available in solar (a light tint with 72% visible light transmission) •Included two-point mounting hardware consists of polished billet aluminum handlebar clamp that fits 25 mm (1”) and 22 mm (7/8”) handlebars (with sizing band), aluminum rake plates and bushings, stainless steel support rods and socket-head screws •Optional 32 mm (1 1/4”) handlebar clamps sold separately (PART #MEM9950) NOTE: To remove, simply loosen two socket-head screws, leaving clamps on bars for perfect reattachment of shield. PART # DESCRIPTION MEM1719 Solar DEMON •Measures 53,5 cm W x 45,5 cm H (21” W x 18” H) above headlight •Fits most round headlights •Made of Lucite® for excellent optics and durability •Available in solar (a light tint with 72% visible light transmission) •Included two-point mounting hardware consists of polished billet aluminum handlebar clamps that fit 25 mm and 22 mm (1” and 7/8”) handlebars (with sizing band), aluminum rake plates and bushings, stainless steel support rods and socket-head screws •Optional 32 mm (1 1/4”) handlebar clamps sold separately (PART #MEM9950) NOTE: To remove, simply loosen two socket-head screws, leaving clamps on bars for perfect reattachment of shield. THE SHOOTER •Looks great on today’s wide-body motorcycles •Measures 48,5 cm W (19”) x approximately 35,5 cm H (14”) above headlight •Fits most round headlights •Made of Lucite® for excellent optics and durability •Available in solar (a light tint with 72% visible light transmission) •Included two-point mounting hardware consists of polished billet aluminum handlebar clamps that fit 25 mm (1”) and 22 mm (7/8”) handlebars (with sizing band), aluminum rake plates and bushings, stainless steel support rods and socket-head screws •Optional 32 mm (1 1/4”) handlebar clamps sold separately (PART #MEM9950) NOTE: To remove, simply loosen two socket-head screws, leaving clamps on bars for perfect reattachment of shield. CLASSIC DEUCE •Smooth shape surrounds headlight to become part of the motorcycle •Measures approximately 48,5 cm W x 47 cm H (19 1/2” W x 18 1/2” H) above headlight •Made of Lucite® for excellent optics and durability •Available in solar (a light tint with 72% visible light transmission) •Solid two-point handlebar mounting hardware fits many custom and stock applications •Includes two-point mounting hardware consisting of polished billet aluminum handlebar clamps that fit 25 mm (1”) and 22 mm (7/8”) handlebars (with sizing band) and CNC-machined aluminum rake plates, fittings and stainless steel socket head screws •Optional 32 mm (1 1/4”) handlebar clamps sold separately (PART #MEM9950) NOTE: To remove, simply loosen two socket-head screws, leaving clamps on bars for perfect reattachment of shield. 32 MM (1 1/4”) HANDLEBAR CLAMPS •Allow you to mount a Memphis Shades Classic Deuce, Hell Cat, Demon or The Shooter to a bike with 32 mm (1 1/4”) handlebars •Sold in pairs PART # DESCRIPTION MEM2219 Solar PART # DESCRIPTION MEM1619 Solar PART # DESCRIPTION MEM2129 Solar PART # DESCRIPTION MEM9950 32 mm (1 1/4”) handlebar clamps (pr.)
dragspecialties.eu / partseurope.eu SECTION 1 All part numbers in BLUE are new for the OldBook. WINDSHIELDS & FAIRINGS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS EXHAUST ENGINE FUEL/AIR SYSTEMS GASKETS & SEALS TRANSMISSION, CLUTCH LINE & DRIVELINE ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS LIGHTING & LICENSE PLATES CABLES BRAKES & BRAKE LINES DASHES & GAUGES TANKS & OIL FILTERS FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS AUDIO, COMMUNICATION & MOUNTS FENDERS WHEELS & AXLES COVERS, LOCKS & GENERAL 15 See FATBOOK For Late Model Applications REPLACEMENT PLASTIC FOR HARLEY-DAVIDSON WINDSHIELDS continued on next page. REPLACEMENT PLASTIC FOR HARLEY-DAVIDSON WINDSHIELDS •Now riders can replace their OEM windshield with the size and color of their choice •Available in clear and solar (a light tint with 72% visible light transmission) •Made of Lucite® for excellent optics and durability •Available for six models in up to four different heights – pick a size that’s right for you •Perfect fit with OEM hardware •Holes are not drilled but rather machined to accept snap-in nylon inserts that prevent stress fractures and star cracks commonly seen around holes – an exclusive feature of Memphis Shades replacement plastic DESCRIPTION 38 CM (15”) 43 CM (17”) 48,5 CM (19”) 53,5 CM (21”) FOR 94-98 FLHR W/ OEM WINDSHIELD (CHECK ALL MEASUREMENTS FIRST) Clear 2310-00101 2310-00191 2310-00281 2310-0037 Solar 2310-00181 2310-00271 2310-00361 2310-0045 DESCRIPTION 38 CM (15”) 43 CM (17”) 48,5 CM (19”) 53,5 CM (21”) FOR 84, 99-00 FXR, 91-98 FXD W/ OEM ACCESSORY DETACHABLE COMPACT WINDSHIELD (CHECK ALL MEASUREMENTS FIRST) Clear 2310-00821 2310-00911 2310-01001 - 1 ABE approved. 1 ABE approved. Due to variations in OEM mounting hardware, these windshields may not fit all models; be sure to check measurements before ordering. VERTICAL STRAPS There is a right and left strap, although they measure the same. HORIZONTAL STRAPS The Windshield should have one of the two straps illustrated. Straps shown for reference only. NOTE: Measurements are approximate and measured center to center of holes on the outside of windshield.
dragspecialties.eu / partseurope.eu All part numbers in BLUE are new for the OldBook. SECTION 1 WINDSHIELDS & FAIRINGS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS EXHAUST ENGINE FUEL/AIR SYSTEMS GASKETS & SEALS TRANSMISSION, CLUTCH LINE & DRIVELINE ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS LIGHTING & LICENSE PLATES CABLES BRAKES & BRAKE LINES DASHES & GAUGES TANKS & OIL FILTERS FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS AUDIO, COMMUNICATION & MOUNTS FENDERS WHEELS & AXLES COVERS, LOCKS & GENERAL 16 See FATBOOK For Late Model Applications REPLACEMENT PLASTIC FOR HARLEY-DAVIDSON WINDSHIELDS (CONT) DESCRIPTION 38 CM (15”) 43 CM (17”) 48,5 CM (19”) 53,5 CM (21”) FOR 86-98 FXWG, 84-99 FXST, 93-98 FXDWG W/ OEM ACCESSORY DETACHABLE COMPACT WINDSHIELD (CHECK ALL MEASUREMENTS FIRST) Clear - 2310-01181 2310-01271 - Solar 2310-01171 - 2310-0135 - DESCRIPTION 38 CM (15”) 43 CM (17”) 48,5 CM (19”) 53,5 CM (21”) FOR 86-98 FXWG, 84-99 FXST/FXSTC/FXSTB, 93-98 FXDWG W/ OEM ACCESSORY QUICK-RELEASE COMPACT WINDSHIELD (CHECK ALL MEASUREMENTS FIRST) Solar - - 2310-0518 - DESCRIPTION 38 CM (15”) 43 CM (17”) 48,5 CM (19”) 53,5 CM (21”) FOR 93-99 FLSTS/FXSTS W/ OEM ACCESSORY DETACHABLE COMPACT WINDSHIELD (CHECK ALL MEASUREMENTS FIRST) Clear - 2310-01451 2310-01541 - Solar - -1 2310-01621 - DESCRIPTION 38 CM (15”) 43 CM (17”) 48,5 CM (19”) 53,5 CM (21”) FOR 90-99 FLSTF, 90-99 FLSTC, 93-96 FLSTN W/ OEM ACCESSORY DETACHABLE KING SIZE WINDSHIELD (CHECK ALL MEASUREMENTS FIRST) Clear 2310-00461 2310-00551 2310-00641 2310-0073 Solar 2310-00541 - 2310-00721 - 1 ABE approved. 1 ABE approved. 1 ABE approved.
dragspecialties.eu / partseurope.eu SECTION 1 All part numbers in BLUE are new for the OldBook. WINDSHIELDS & FAIRINGS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS EXHAUST ENGINE FUEL/AIR SYSTEMS GASKETS & SEALS TRANSMISSION, CLUTCH LINE & DRIVELINE ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS LIGHTING & LICENSE PLATES CABLES BRAKES & BRAKE LINES DASHES & GAUGES TANKS & OIL FILTERS FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS AUDIO, COMMUNICATION & MOUNTS FENDERS WHEELS & AXLES COVERS, LOCKS & GENERAL 17 See FATBOOK For Late Model Applications SPOILER WINDSHIELDS FOR OEM FAIRINGS •Designed to be looked over, the spoiler windshield diffuses the airstream, effectively slowing the flow without buffeting •Made of aircraft-grade Lucite® for excellent optics and durability •Uses OEM hardware for a perfect fit COLOR 76 MM (3”) 12,5 CM (5”) 14 CM (5,5”) 16,5 CM (6,5”) 21,5 CM (8,5”) 23 CM (9”) 25,5 CM (10”) FOR 98 FLTR Smoke - - 2310-05941 - 2310-06061 - 2310-0609 Dark smoke - - 2310-05951 - 2310-06081 - - Black opaque - - 2310-05961 2310-06021 - - - FOR 96-98 FLHT Smoke 2310-0677 2350-01732 - 2350-01762 - 2350-01792 - Dark smoke 2310-0679 2310-0664 - 2310-0665 - 2310-0666 - 1 Not recommended for use with metal windshield trim. 2 ABE approved. REPLACEMENT WINDSHIELDS FOR BAGGERS •Available in gradient black as well as clear and solar (a light tint with 72% visible light transmission) •Made of Lucite® for excellent optics and durability •Available in multiple heights DESCRIPTION 12,5 CM (5”) 18 CM (7”) 23 CM (9”) 30,5 CM (12”) 38 CM (15”) FOR 96-98 FLHT Clear - 2310-02552 MEP81102 MEP8120 MEP8130 Solar - 2310-02542 - - MEP8139 Gradient black 2310-00031, 2 - - - - FOR 86-95 FLHT/FLHTC Clear - - MEP80102 MEP8020 MEP8030 Solar 2310-00021, 2 - - - - Gradient black 2310-00011, 2 - - - - 1 All 12,5 cm (5”) shields are solid, not gradient. 2 ABE approved. See chart for details See chart for details •Use the OEM hardware for a perfect fit •See page 38 for matching deflectors 2310-0596 2310-0677 2350-0173 2310-0666 Clear Clear Solar 2310-0003 12,5 cm (5”) Solid windshield
dragspecialties.eu / partseurope.eu All part numbers in BLUE are new for the OldBook. SECTION 1 WINDSHIELDS & FAIRINGS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS EXHAUST ENGINE FUEL/AIR SYSTEMS GASKETS & SEALS TRANSMISSION, CLUTCH LINE & DRIVELINE ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS LIGHTING & LICENSE PLATES CABLES BRAKES & BRAKE LINES DASHES & GAUGES TANKS & OIL FILTERS FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS AUDIO, COMMUNICATION & MOUNTS FENDERS WHEELS & AXLES COVERS, LOCKS & GENERAL 18 See FATBOOK For Late Model Applications REPLACEMENT PLASTIC FOR MEMPHIS SHADES WINDSHIELDS •Replacement plastic is a low-cost alternative to replace worn or damaged Memphis Shades •Available in clear and solar (a light tint with 72% visible light transmission) •Made of Lucite® for excellent optics and durability PART # DESCRIPTION MEMPHIS FATS FOR 14,5 CM – 18 CM (5 3/4” – 7”) HEADLIGHTS 38 CM (15”) REPLACEMENT PLASTIC 2313-0084 Solar 43 CM (17”) REPLACEMENT PLASTIC MEP3210 Clear 48,5 CM (19”) REPLACEMENT PLASTIC MEP3310 Clear 53,5 CM (21”) REPLACEMENT PLASTIC MEP3410 Clear MEP3419 Solar PART # DESCRIPTION MEMPHIS SLIM FOR 14,5 CM – 18 CM (5 3/4” – 7”) HEADLIGHTS 38 CM (15”) REPLACEMENT PLASTIC MEP4110 Clear 43 CM (17”) REPLACEMENT PLASTIC MEP4219 Solar MEMPHIS FATS AND SLIM WINDSHIELD STRAPS •The same high-quality straps that come with the Fats or Slim series windshields •Available in polished stainless steel •All fasteners required to mount the straps to the windshield are included WINDSHIELD/FAIRING STORAGE BAG •Constructed of 600D “tool bag” material and lined with faux Sherpa to ensure a mar-free surface •Safe way to carry or store Memphis Shades windshields or small fairings •Convenient handle to carry windshield/fairing or hang out of harm’s way •Will hold one Memphis Fats/Slim, Sportshield or fairing (Bullet, Gauntlet, Cafe) with or without mounting plates installed •Also fits most OEM H-D windshields, including Road King windshield PART # DESCRIPTION FOR MEMPHIS FATS (11 MOUNTING BOLTS) 2321-0094 Polished stainless steel PART # DESCRIPTION FOR MEMPHIS SLIMS (9 MOUNTING BOLTS) 2321-0095 Polished stainless steel PART # DESCRIPTION 3508-0042 Windshield bag 2321-0095 •Available for standard headlight size of 14,5 cm - 18 cm and 23 cm (53/4” - 7” and 9”) headlights •Replacement plastic does not include any hardware •Sportshield replacement plastic has same part numbers as found on page 11 MEP4219 MEP3210
dragspecialties.eu / partseurope.eu SECTION 1 All part numbers in BLUE are new for the OldBook. WINDSHIELDS & FAIRINGS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS EXHAUST ENGINE FUEL/AIR SYSTEMS GASKETS & SEALS TRANSMISSION, CLUTCH LINE & DRIVELINE ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS LIGHTING & LICENSE PLATES CABLES BRAKES & BRAKE LINES DASHES & GAUGES TANKS & OIL FILTERS FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS AUDIO, COMMUNICATION & MOUNTS FENDERS WHEELS & AXLES COVERS, LOCKS & GENERAL 19 See FATBOOK For Late Model Applications PART # DESCRIPTION FOR 96-98 FLHT/FLHTC 2310-0226 29 cm (11,5”) clear 2310-0225 29 cm (11,5”) tint 2310-0715 26,5 cm (10,5”) clear 2310-0717 26,5 cm (10,5”) dark smoke PART # DESCRIPTION FOR 96-98 FLHT/FLHTC (CONT) 2310-0716 26,5 cm (10,5”) tint 2310-0213 16,5 cm (6,5”) black 2310-0823 16,5 cm (6,5”) clear 2310-0222 89 mm (3,5”) tint PART # DESCRIPTION FOR 86-95 FLHT/FLHTC 2310-0399 16,5 cm (6,5”) dark smoke FLARE® WINDSHIELDS •Wind tunnel designed and tested, the “hips” provide added downforce while the flip at the tip directs air over the rider to help eliminate the swirl of air found in front of the rider on standard windshields •Lexan® polycarbonate with FMR hard coating is used to create these custom-molded designs with unmatched durability •All are predrilled for easy mounting using stock windshield hardware NOTE: The black version may not be suitable for shorter riders as it’s an opaque material. The Klock Werks Flare® Windshields are protected under United States Patents: D632235S, D586274S, D586275S, D633017S, D626046S, D633018S and also under International Patents: 324093, 324094, 325192. 2310-0717 26,5 cm (10,5”) dark smoke Wind tunnel designed and tested 29 cm (11,5”) 89 mm (3,5”)
dragspecialties.eu / partseurope.eu All part numbers in BLUE are new for the OldBook. SECTION 1 WINDSHIELDS & FAIRINGS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS EXHAUST ENGINE FUEL/AIR SYSTEMS GASKETS & SEALS TRANSMISSION, CLUTCH LINE & DRIVELINE ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS LIGHTING & LICENSE PLATES CABLES BRAKES & BRAKE LINES DASHES & GAUGES TANKS & OIL FILTERS FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS AUDIO, COMMUNICATION & MOUNTS FENDERS WHEELS & AXLES COVERS, LOCKS & GENERAL 20 See FATBOOK For Late Model Applications PART # DESCRIPTION FOR 98 FLTR 2310-0749 30,5 cm (12”) dark smoke 2310-0748 30,5 cm (12”) tint PART # DESCRIPTION FOR 98 FLTR (CONT) 2310-0482 35,5 cm (14”) dark smoke 2310-0481 35,5 cm (14”) tint 30,5 CM (12”) PRO-TOURING FLARE® WINDSHIELDS •The Pro Touring Flare® is a wider, more full-coverage option for riders and passengers looking for greater wind protection during long-haul touring, yet is stylish enough for use around town •The patented design features “hips” at the sides that re-route air away from the rider while adding downforce to the front end to improve stability and handling compared to the stock windshield design (the stock design creates lift) •The “flip” at the top of the Flare® kicks air up and over the rider creating cleaner, less turbulent air for the rider and passenger •Wind tunnel tested and designed for maximum performance and air management •Made of Lexan® polycarbonate with FMR hard coating on both sides of the shield for unmatched durability •All are predrilled for easy mounting using stock windshield hardware The Klock Werks Flare® Windshields are protected under United States Patents: D632235S, D586274S, D586275S, D633017S, D626046S, D633018S. And also under International Patents: 324093, 324094, 325192. 2310-0748 2310-0749 PART # DESCRIPTION FOR 96-98 FLHT/FLHTC/FLHX AND H-D FL TRIKE 2310-0737 16,5 cm (6,5”) blue 2310-0736 16,5 cm (6,5”) green 2310-0733 16,5 cm (6,5”) orange 2310-0735 16,5 cm (6,5”) pink 2310-0734 16,5 cm (6,5”) yellow PART # DESCRIPTION FOR 96-98 FLHT/FLHTC/FLHX AND H-D FL TRIKE (CONT) 2310-0760 89 mm (3,5”) blue 2310-0759 89 mm (3,5”) green 2310-0756 89 mm (3,5”) orange 2310-0758 89 mm (3,5”) pink PART # DESCRIPTION FOR 98 FLTR 2310-0722 20,5 cm (8”) blue 2310-0721 20,5 cm (8”) green 2310-0718 20,5 cm (8”) orange 2310-0720 20,5 cm (8”) pink 2310-0719 20,5 cm (8”) yellow ICE KOLOR FLARE® WINDSHIELDS •Wind tunnel designed and tested, the “hips” provide added downforce while the flip at the tip directs air over the rider to help eliminate the swirl of air found in front of the rider on standard windshields •Windshields are made from acrylic and have a vibrant fluorescent edge to give your motorcycle a little extra pop •All are predrilled for easy mounting using stock windshield hardware The Klock Werks Flare® Windshields are protected under United States Patents: D632235S, D586274S, D586275S, D633017S, D626046S, D633018S and also under International Patents: 324093, 324094, 325192. 2310-0719 2310-0721 2310-0733 2310-0735 2310-0737 2310-0759
dragspecialties.eu / partseurope.eu SECTION 1 All part numbers in BLUE are new for the OldBook. WINDSHIELDS & FAIRINGS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS EXHAUST ENGINE FUEL/AIR SYSTEMS GASKETS & SEALS TRANSMISSION, CLUTCH LINE & DRIVELINE ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS LIGHTING & LICENSE PLATES CABLES BRAKES & BRAKE LINES DASHES & GAUGES TANKS & OIL FILTERS FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS AUDIO, COMMUNICATION & MOUNTS FENDERS WHEELS & AXLES COVERS, LOCKS & GENERAL 21 See FATBOOK For Late Model Applications PART # DESCRIPTION FOR 96-98 FLHT/FLHTC/FLHTCU 2310-0819 16,5 cm (6,5”) blue 2310-0818 16,5 cm (6,5”) green PART # DESCRIPTION FOR 96-98 FLHT/FLHTC/FLHTCU (CONT) 2310-0815 16,5 cm (6,5”) orange 2310-0820 16,5 cm (6,5”) purple PART # DESCRIPTION FOR 96-98 FLHT/FLHTC/FLHTCU (CONT) 2310-0817 16,5 cm (6,5”) red 2310-0816 16,5 cm (6,5”) yellow PART # DESCRIPTION FOR 98 FLTR 2310-0813 20,5 cm (8”) blue 2310-0812 20,5 cm (8”) green PART # DESCRIPTION FOR 98 FLTR (CONT) 2310-0809 20,5 cm (8”) orange 2310-0814 20,5 cm (8”) purple PART # DESCRIPTION FOR 98 FLTR (CONT) 2310-0811 20,5 cm (8”) red 2310-0810 20,5 cm (8”) yellow KOLOR SPORT FLARE® WINDSHIELDS •The Kolor Sport Flare® is streamlined and offers radical curves and a sportier stance; it complements the lines of the new fairing with a more aggressive profile and adds stability and handling with improved air management •The patented design features “hips” at the sides that re-route air away from the rider while adding downforce to the front end to improve stability and handling compared to the stock windshield design (the stock design creates lift) •The “flip” at the top of the Flare kicks air up and over the rider creating cleaner, less turbulent air for the rider and passenger •Wind tunnel tested and designed for maximum performance and air management •Windshields are made from acrylic •All are predrilled for easy mounting using stock windshield hardware The Klock Werks Flare® Windshields are protected under United States Patents: D632235S, D586274S, D586275S, D633017S, D626046S, D633018S. And also under International Patents: 324093, 324094, 325192. 2310-0809 2310-0814 2310-0812 2310-0819 2310-0815 2310-0817 2310-0816
dragspecialties.eu / partseurope.eu All part numbers in BLUE are new for the OldBook. SECTION 1 WINDSHIELDS & FAIRINGS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS EXHAUST ENGINE FUEL/AIR SYSTEMS GASKETS & SEALS TRANSMISSION, CLUTCH LINE & DRIVELINE ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS LIGHTING & LICENSE PLATES CABLES BRAKES & BRAKE LINES DASHES & GAUGES TANKS & OIL FILTERS FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS AUDIO, COMMUNICATION & MOUNTS FENDERS WHEELS & AXLES COVERS, LOCKS & GENERAL 22 See FATBOOK For Late Model Applications FLARE® BILLBOARD WINDSHIELDS •Modeled after the original Flare® windshield for Baggers, now almost every rider can get all of the same performance and style with bolt-on ease •With patented Klock Werks “hips” on the side and a flip at the top, shields have been wind tunnel designed and tested to produce the same amount of additional down force as original •Real world testing and computer simulation also produced multiple heights that will work for most riders; heights listed are measured from headlight opening to top of shield •All are predrilled for easy mounting using stock windshield mounting kits •For the following applications “Detachable” refers to the old-style H-D grommet/hinge style mechanism NOTE: All measurements given are approximate. The Klock Werks Flare® Windshields are protected under United States Patents: D632235S, D586274S, D586275S, D633017S, D626046S, D633018S and also under International Patents: 324093, 324094, 325192. FOR 90-99 FLSTF, 86-99 FLSTC WITH OEM ACCESSORY DETACHABLE KING-SIZE WINDSHIELD PART # DESCRIPTION 51 CM TALL X 70 CM WIDE (20” x 26 3/8”) 2310-0711 Dark smoke PART # DESCRIPTION 43 CM TALL x 70 CM WIDE (17” x 26 3/8”) 2310-0389 Clear PART # DESCRIPTION 43 CM TALL x 70 CM WIDE (17” x 26 3/8”) (CONT) 2310-0710 Dark smoke 2310-0390 Tint FOR 94-98 FLHR WITH OEM ACCESSORY DETACHABLE KING-SIZE WINDSHIELD PART # DESCRIPTION 49 CM TALL X 67,5 CM WIDE (16 3/8” X 26 5/8”) 2310-0709 Dark smoke PART # DESCRIPTION 41,5 CM TALL X 67,5 CM WIDE (16 3/8” X 26 5/8”) 2310-0387 Clear PART # DESCRIPTION 41,5 CM TALL X 67,5 CM WIDE (16 3/8” X 26 5/8”) (CONT) 2310-0708 Dark smoke 2310-0388 Tint 2310-0708 2310-0388 2310-0389 PART # DESCRIPTION 17 3/4” TALL X 22 3/4” WIDE 2310-0348 Clear
dragspecialties.eu / partseurope.eu SECTION 1 All part numbers in BLUE are new for the OldBook. WINDSHIELDS & FAIRINGS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS EXHAUST ENGINE FUEL/AIR SYSTEMS GASKETS & SEALS TRANSMISSION, CLUTCH LINE & DRIVELINE ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS LIGHTING & LICENSE PLATES CABLES BRAKES & BRAKE LINES DASHES & GAUGES TANKS & OIL FILTERS FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS AUDIO, COMMUNICATION & MOUNTS FENDERS WHEELS & AXLES COVERS, LOCKS & GENERAL 23 See FATBOOK For Late Model Applications 135-10DS PART # DESCRIPTION FOR 96-98 FLHT/FLHTC S13410 25,5 cm (10”) clear S13413 33 cm (13”) clear S13416 40,5 cm (16”) clear S1356 15 cm (6”) tint S1358 20,5 cm (8”) tint S13510 25,5 cm (10”) tint S13513 33 cm (13”) tint S13516 40,5 cm (16”) tint PART # DESCRIPTION FOR 96-98 FLHT/FLHTC (CONT) 135-6DS 15 cm (6”) dark smoke 135-8DS 20,5 cm (8”) dark smoke 135-10DS 25,5 cm (10”) dark smoke FOR 86-95 FLHT/FLHTC 13010C 25,5 cm (10”) clear 13013C 33 cm (13”) clear 13016C 40,5 cm (16”) clear 13110T 25,5 cm (10”) tint PART # DESCRIPTION FOR 86-95 FLHT/FLHTC (CONT) 13113T 33 cm (13”) tint 13116T 40,5 cm (16”) tint FOR 84-95 FLT 13216C 40,5 cm (16”) clear 13316T 40,5 cm (16”) tint 13319T 48,5 cm (19”) tint REPLACEMENT WINDSHIELDS FOR HARLEY-DAVIDSON •The 130 series windshields are exact replacements for H-D Touring models •Available in clear, tint and dark smoke finishes in several different sizes •Made of tough 5 mm (3/16”) aircraft-quality Lucite® acrylic for optically perfect vision S13413 96-98 FLHT/FLHTC Series 86-95 FLHT/FLHTC Series 84-95 FLT Series
www.bigtwin-motorcycles.deRkJQdWJsaXNoZXIy ODQ0NDEw